*The image is a CAD rendering; the actual part will be CLEAR.
Note: This is a 3D printed part and is made to order. As such, there is a longer than usual processing time after an order is placed before the part can be shipped. Please see below for the current turnaround time.
Current turnaround time: ~1 week
This is a SLA printed spring rest that captures the Longshot’s spring on the plunger assembly. This part is designed to retain the spring when using an OMW Workshop aluminum plunger tube but can be used in any expanded plunger tube system as long as the internal diameter of the tube is around 36mm or larger. This spring rest does not reinforce the blaster in any way, but it is robust enough to be modified or attached to most user-made shell reinforcement solutions. The internal diameter of this spring rest will fit stock plunger rods, OMW Longshot stage 2 plunger rods, and any plunger rods narrower than the stock rod.
3D printed part warning:
This is a 3D printed component and is intended for the serious hobbyist. This is not meant to be a drop in part and there may be variations in surface finish as well as dimensional quality. The end user may need to cut, sand, and/or modify this printed part to achieve their desired fit and/or finish.