*The image is a CAD rendering; the actual part will be CLEAR.
Note: This is a 3D printed part and is made to order. As such, there is a longer than usual processing time after an order is placed before the part can be shipped. Please see below for the current turnaround time.
Current turnaround time: ~1 week
This is a SLA printed chamber for a pusher-style Longshot build and is designed to accept 17/32-inch brass or an Orange Mod Works Workshop 17/32-inch aluminum barrel. This chamber can be installed in any model of the Longshot blaster, but is designed to work with the OMW Workshop 3D printed pusher breech. The internal diameter of the chamber is 13.6mm and is meant to friction fit against a 17/32-inch barrel. Though it can be sanded to make space for epoxy or other adhesive should you want to glue the barrel in place.
3D printed part warning:
This is a 3D printed component and is intended for the serious hobbyist. This is not meant to be a drop in part and there may be variations in surface finish as well as dimensional quality. The end user may need to cut, sand, and/or modify this printed part to achieve their desired fit and/or finish.